*Fully programmable Digital controlled system.
*Eight circuits rated @30amps @12.5vdc per circuit that are ?End-User? friendly terminal block for attaching accessories.
*Expandable (Daisy Chained selectable) to up to 32 circuits with simple plug-n-play features!
*Low voltage cutoff (LVCO) battery protection circuit has spec voltage cutoff at 11.2 VDC with a two-minute delay before shutting down the SourceSE. This is useful when you have accessories turned on while the *vehicle is not running. When the vehicle starts, the accessories can then be used again. The low voltage battery protection circuit can be turned off with the DIP switches.
*No more worrying about what rated fuse to install! The system will protect from 1.5 amps to 30 amps automatically. The SourceSE incorporates a failsafe self-healing fault protection system. Fuses have been eliminated (for all accessory outputs) and replaced with current-sensing MOSFETs controlled by a microprocessor. This is a great feature for low maintenance and troubleshooting
*Shield receptacle for the optional Bluetooth module for a plug-n-play end-user upgrade. This creates a scalable platform for future optional enhancements.
*One single ATM mini-style fuse for LVCO protection and reset.
HD Switch Panel Features:
*Encased in an aluminum billet machined housing, powdercoated black, utilizing tactile switches encapsulated in silicone.
*Silicone Buttons with positive touch feedback.
*Panel is designed to withstand the harshest environments with all weather conditions taken into account.
*Compact in size: 2-7/8?W x 4-7/8?L x 1/2? Thick (smaller than an iPhone).
*Universal back with two pressed-in 1/4-20 studs x 5/8? inches long for flat mounting.
*Standard universal articulating mount for a multitude of mounting options.
*One standard RJ45 jack on back for communication cable between HD panel and the Source.
*HD can be located up to 100 feet from the Source using standard CAT-6 Ethernet cable.
*Built in Bluetooth LE allows you to program and control our system with iPhones, iPad, iPad Mini, sPOD HD app. (free download)
*Each switch programmable for dimming, flash, momentary, strobe, and switch linking (program any switch to be a master to control other switches).
*All 8 switches are backlit.
*Adjustable timer to turn backlight off and a simple touch on any switch to reactivate.
*Quickly turn backlight off by holding 2 designated buttons.
*Backlight color & intensity can be changed to any color to match vehicle interior dash lighting.
*Legends can be applied (comes standard with one sheet of 72 legends).
*Each switch has 3 status lights: Red (left) = On, White (center) = Flash/Strobe active, Blue (right) = Active visual feedback when button is pushed.
*Status lights can be dimmed.
*Additional HD smart controller can be added for different locations.
*One HD smart controller can be programmed to control up to 32 circuits
*HD can run in conjunction with our SE Touchscreen, Bluetooth and SE 8 Switch panel.